AIRLIVE WL-5460AP V2 FIRMWARE & DRIVER

Tell us what’s missing. For example, if you put one minute for watch Interval. It differs between each mode. Selecting different method will enable you to have different level of security. The 40bit and 64bit encryption are the same because of out 64 bits, 40 bits are private.

Uploader: Arazil
Date Added: 12 July 2012
File Size: 25.91 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 75062
Price: Free* [*Free Regsitration Required]

WL-5460AP v2

They are used for identification purpose only. Security MAC address airlivee Y. My wireless transfer is very unstable or stopped sometimes.

The WAN port become the wireless function.

To connect 2 LANs together wirelessly. We can extend the wireless coverage by using 2 more APs to create a wireless repeater:.

Index of /ovislink/AP/FW

Using this method, users must enter a digit number for bit or digit number for bit in the KEY field. Unplug the power of WLAP. Please follow the procedure below to setup IP Traffic Control 1. Most of the wireless problem are caused by channel interference. It varies between each mode 4. Page 53 select a level to make sure that the output power measured at the antenna end will not exceed the legal limit in your country.

  GENERIC USB JOYPAD DRIVER DOWNLOAD

Page 29 and choose the channel with best situation for communication. You should perform the following steps: Similar offers On Top. How can I use it?

Enter the information provided by your system manager. All devices try to access the network should have the matching encryption key. Bridge loop could cause connection fail or broadcast storm.

Users must select the same wl-5460a; number for all devices. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. I was configuring AirLive Please set the wireless mode to ” Or point us to the URL where the manual is located. Set your PC’s IP address to You can choose one mode of the following you need.

The latest e11 firmware provide full command line feature via Telnet. Blinking when sending or receiving data.

Download AirLive WLAP Access Point Firmware eu for OS Independent

Once you make sure it has emergency code function. But the process failed in the middle. It does not require a RADIUS server in order to provide association authentication, but you do have to enter a shared key for the authentication purpose. Please enter the MAC address without the colon mark “: Can it be done and if so, which settings do I need to select to: When activated, the AP will ping the “Watch Host” xirlive.

  MARVELL SAS STORAGE CONTROLLER DRIVER

If the IP address is on Internet, you must configure the Gateway information correctly.