How can I make sure my serial port is working in Windows? Select the Let me pick from a list of device drivers on my computer option. Everything is hooked up but nothing is working. Now I’ve fixed it, it works fine. You can check in the kernel configuration file. When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Uploader: Akinokus
Date Added: 2 May 2012
File Size: 17.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 14470
Price: Free* [*Free Regsitration Required]

Yes – 0 No – 0 Report. Use a different serial or parallel cable, serial or parallel port, and serial or parallel device in your setup to see if the problem persists. I did a bit of research months ago and found that most likely I need to install the drivers for this card.

Write a review Need a little help getting started? The chipset is not well supported and does not work well. Sign up using Email and Password.

To continue using , please upgrade your browser.

Check out our review guidelines. After the download is complete, right-click seriql zip folder that you downloaded, click Extract Alland complete the instructions. To install the driver: Serial or parallel cables Serial or parallel ports Serial or parallel devices To test your setup components, try the following: Click the Windows icon in the taskbar.


When you test your cables, it is recommended that you do the following: I had to open the moulded cover over the d-types and re-solder the connections as pin 5 of the 9-way ground was not connected properly causing the cable not to work.

Take a metal paperclip or wire and eerial pins 2 and 3.

Asix Electronics – I/O Connectivity ICs – USB to Serial/Parallel/IrDA Bridge

You can test to make sure that the following components are working correctly and are not the source of the issue:. When I connect the USB device to the system the ethernet port does not appear to light up or be seen by the system as a functional NIC.

Open a telnet session on the COM port number of the device that you are testing. The Hardware Type screen does not appear on all systems. Before you continue, save any open documents and close all open programs.

The part number and product ID are on the product packaging. The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening. Download the latest drivers from the StarTech. Post as a guest Name. Your computer will automatically complete the driver installation and your device should be ready to use.

For products related to this article, click here. You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection. Click OKand then click Next.


To check whether or not an RS serial port is working, perform an RS loopback test by doing the following: Why does my USB device stop working after my computer wakes back up from sleep mode in Windows? If the Run as Administrator option is not available, you might be attempting to run the wsix from within the zipped file.

USB to Serial/Parallel Adapter Cable – RS and IEEE Combo Cable |

To disable driver signature enforcement, complete the following: Post Your Answer Discard By clicking “Post Your Answer”, you acknowledge that you have read our updated terms of serviceprivacy policy and cookie policyand that your continued use of the website is subject to these policies.

In the left pane, click General. Browse to the Drivers folder and open the bit or the bit folder, depending seriall your system type. Please enter a headline for your review.