Install the edge connector of the add-in card into the expan- sion slot. If this item is enabled the following items become available. TX,RX inverting enable Default: In the Memory Resources sub menu, use the first item Reserved Memory Base to set the start address of the memory you want to reserve for the ISA expansion card. Use these items to configure each device on the IDE channel.

Uploader: Malabar
Date Added: 1 January 2014
File Size: 14.97 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 8697
Price: Free* [*Free Regsitration Required]

MATSONIC MSC User`s manual |

Disabled If you have two floppy diskette drives in your system, this item allows you to swap the assigned drive letters so that drive A becomes drive B, and drive B becomes audil A. Further, the manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes.

This device must accept any interference received, in- cluding interference that may cause undesired operation. EXE by double clicking on the filename. We strongly recommend that you do not overclock the mainboard to run processors or other components faster than their rated speed. Onboard Legacy Audio Default: Plug one of the connectors on the diskette drive cable into the data connector on the back edge of the floppy diskette drive.

C ooling fan and heat sink C PU socket Important Information Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved.


Further features include support for four ms717c line-level stereo inputs. Use the second item Reserved Audko Length to set the amount of reserved memory. Typematic Delay Msec Default: Slower rates may be required in certain system designs to support loose layouts or slower memory. This concludes Chapter 1.

Matsonic MSC (MSSM) Free Driver Download for Windows 98SE, 98, 95 () –

The software for this mainboard is stored in the MSC folder. We recommend that you leave this item at the default value. Mainboard msc Installation Notes Refer to your operating system handbook for instructions on in- stalling Linux drivers. Avoid using cooling fans with sharp edges on the fan casing and the clips.

AGP technology provides a direct connection between the graphics sub-system and the processor so that the graphics do not have to compete for processor time with other devices on the PCI bus.

One IDE drive ribbon cable and bracket!

Matsonic MS7127C Audio Driver

Setting passwords have this kind of dialog box. Installation Procedure Follow the steps below to install a processor on your mainboard: About the Manual The manual consists of the following chapters: This device may not cause harmful interference, and!

Self-Monitoring, Analysis, and Reporting Technology system is a diagnostics technology that monitors and predicts device performance. PCI Slot Use this item to define if your graphics adapter is installed in one of the PCI slots or select Onboard if you have a graphics system integrated on the mainboard. Disabled When this item is enabled and the system crashes three times because the processor has been overclocked, the BIOS will automatically adjust the speed of the processor to the system bus speed multiplied by two.


Remove the blanking plate from the slot in the system case that corresponds to the expansion slot that you are going to use. Enabled Some new processors are installed with a unique processor number.

Use this item to enable or disable the ACPI feature. If the connector is not keyed, make sure that you match the pin-1 side of the cable connector with the pin-1 side of the device connector. This number may be used for verification in Internet transactions and ecommerce.

Some features on the mainboard are imple- mented by cabling connectors on the mainboard to indicators and switches on the system case. By default, two-wait states are used by the system, allowing for greater stability.

You can cause fatal errors or instability if ms7127cc install the optimized defaults when your hardware does not support them. This setting has to match the requirements of the infrared module used in the system.

Setup Use the Setup Chapter to configure the mainboard for optimum performance. Gate A20 Option Default: